S&M Chloramin B disinfectant and disinfectant chemical

Chloramin B is an industrial chemical widely used in treating surfaces and polluted water sources. This chemical can kill many bacteria that cause diseases in humans such as Salmonella, E.coli, Campylobacter, Norovirus,... Let's Vntradimex learn about the detailed characteristics of Chloramin B in the article below.

Product information

- Product name: Chloramin B - C6H5S02NCINa.3H20

- Other names: sodium benzensulfochleramine

- Content: 25% Chlorine

- Specification: 25kg/barrel

- Product appearance:

+ White powder form: Chloramin B concentration ranges from 25% to 30%, often mixed with water to form an antiseptic solution to spray on the surface of materials to be cleaned.

+ Tablet form: Chloramin B tablets are often used in disinfecting domestic water. This form is often used in households to dehydrate household water. The concentration of the tablets has been strictly controlled by the manufacturer.

Uses

Chlorine is a chemical widely used in cleaning and disinfection. Containing high concentrations of chlorine, Chloramin B is effective in disinfecting and disinfecting water. With appropriate concentrations, Chloramin B is used to purify domestic water, ensuring hygiene and safety for users.

Chloramin B also has the effect of disinfecting surfaces such as hallways, hallways, toilets, surfaces of kitchen utensils, children's toys, etc. Mix a sufficient amount of Cloramin B with water to use.

Use as hand sanitizer or kitchen cleaner.

Note, before using Cloramin B to clean, it is necessary to wipe off dirt on surfaces, and must wipe again with clean water after wiping Cloramin B. During the cleaning process, when you see disinfectant solution or softener If the solution is cloudy, the solution should be replaced with a new one.

User manual

Chloramin B is a solution widely used in disinfection and cleaning, but not everyone knows how to use it most effectively and safely:

Step 1: Mix Chloramin B solution according to the formula written on the product packaging. Normally, the sufficient formula is 0.25g of Chloramin B 25% mixed with 25 liters of water.

Step 2: Wipe dirt on the surface you want to clean.

Step 3: Pour the mixed solution into a hand sprayer, spray bottle, etc., spray evenly on the surface you want to treat, then use a towel to wipe evenly.

Step 4: Wait 20 - 40 minutes for the solution to absorb evenly and kill bacteria

Step 5: Wipe surfaces again with clean water and dry.

Note when using

Disinfectant solution should be used immediately after mixing. Do not leave the solution for more than 24 hours to lose the effectiveness of Chloramin B.

During the spraying process, you should wear gloves and an antibacterial mask to avoid direct contact with the drug.

It is recommended to use 2 wipes to clean the surface. One towel to wipe after spraying, the other towel to wipe with clean water.

For children's toys, soak in Chloramin B solution for 30 minutes. Then, wash the toy with clean water and dry it in the sun.

When inhaling air containing chlorine, go outside and breathe fresh air. If you inhale too much, go to medical facilities for first aid.

Preserve

In a dry place at an appropriate distance from the heat source.

Storage temperature is from - 20 to 30 degrees Celsius.

Do not expose the disinfectant to direct sunlight